Formation of intermediate coupling optical polarons and bipolarons in two-dimensional systems

The formation of the optical polaron and bipolaron in two-dimensional (2D) systems is studied in the intermediate electron–phonon coupling regime. The total energies of the 2D polaron and bipolaron are calculated by using the Buimistrov–Pekar method of canonical transformations. The obtained results are compared with other existing results obtained by using the Feynman path integral method and the modified Lee–Low–Pines unitary transformation method. It is shown that the electron–phonon correlation significantly reduces the total energy of the 2D polaron in comparison with the energy of the strong coupling (adiabatic) polaron. It is found that the polaron formation in 2D systems is possible when the electron–phonon coupling constant α is greater than the critical value ${\alpha }_c?2.94$, which is much lower than a critical value of the electron–phonon coupling constant α in three-dimensional (3D) systems. The critical values of the Fröhlich coupling constant α and the ratio $\eta ={\epsilon }_{\infty }/{\epsilon }_0$ (where ${\epsilon }_{\infty }$ and ${\epsilon }_0$ are the high frequency and static dielectric constants, respectively), which determine the bipolaron stability region in 2D systems, are calculated numerically. It is interesting for application to the layered cuprate superconductors that the (bi)polarons are formed more easily in quasi-2D regions than in the bulk. It is argued that the high-$T_c$ cuprate superconductivity can exist above the bulk superconducting transition temperature $T_c$ as the persisting superfluidity of polaronic (bosonic) Cooper pairs and large bipolarons at quasi-2D grain boundaries or in the CuO₂ layers above $T_c$.     

A new endocytic model based on the co-rotational grid method

Endocytosis plays important roles in many cellular physiological processes, such as metabolism and immune. Many theoretical models have been proposed to study the endocytic process, but little has considered the tensile deformation of the membrane and the actin forces. In this paper, a new endocytic model is proposed based on the co-rotational grid method. Our model gives a direct estimation of the in-plane strain of the plasma membrane and provides a basis for the calculation of further scission process of the vesicle. The results fit well with experimental data in the literature. Moreover, it is suggested that the active forces of actin at the endocytic site is the main mechanism driving the invagination of the plasma membrane.     

棒状LiZnPO4的低温合成与表征

LiZnPO₄的性能与其形貌密切相关,其合成常用的固相法和水热法均无控制其微观形貌的优势。 本文采用改进的沉淀法成功合成了具有棒状结构的LiZnPO₄。 利用热重-差热分析仪(TG-DSC)、X射线衍射仪(XRD)、傅里叶变换红外光谱(FTIR)以及场发射扫描电子显微镜(FE-SEM)等技术研究了LiZnPO₄形成过程、晶相组成、微观结构和形貌。 同时探究了合成方法、煅烧温度、煅烧时间、酸的种类对LiZnPO₄形貌的影响。 结果表明,相比较于固相法,以醋酸为原料的改进沉淀法不仅可以有效降低LiZnPO₄的合成温度至500 ℃,而且很容易控制棒状LiZnPO₄的形成。 在600 ℃下煅烧2 h后可以获得分散性良好、横截面为矩形、直径约为2 μm的规则棒状LiZnPO₄。 此外,对比颗粒状LiZnPO₄和棒状LiZnPO₄的光响应能力,发现棒状LiZnPO₄的光响应能力明显增强。     

一类改进最大熵方法的可调参数分析

在结构可靠性分析中,引入含可调参数的转换函数能对传统的最大熵方法进行改进,获得更高的失效概率预测精度。但是,此可调参数的最佳取值很难确定。针对这一问题,引入概率守恒方程,从功能函数转换前后所得概率密度函数出发,建立其最大熵值的变化关系,给出转换前后最大熵值之差的理论形式。通过对三种典型单调非线性转换函数开展算例研究,发现功能函数转换前后的最大熵值之差与转换函数的最佳可调参数值有关。改变可调参数值驱使最大熵值之差变化的同时,改进最大熵方法能遍历到更好的失效概率估计值。     

基于LS -DYNA公路桥车桥耦合的车辆模型研究

研究公路桥梁在移动车辆荷载作用下的动力响应,建立合理的车辆模型非常重要。为更真实地体现桥梁在车载作用下的动力响应,基于LS-DYNA程序,结合常用重型车辆的结构特性及参数,对车辆的橡胶轮胎、轮胎内气体压力、车轮转动和车辆悬架系统进行模拟,使车辆模型更接近实际车辆。通过车辆轴重和动力特性初步验证车辆有限元模型的有效性;同时,以一座混凝土简支空心板梁桥为算例,验证车轮转动和车桥相互接触力,并将LS-DYNA计算结果与桥梁实测结果进行对比,进一步验证车辆有限元模型的有效性。研究结果表明,基于LS-DYNA建立的三维车辆有限元模型是可行的,可以用于研究车桥相互作用。     

椭球粒子声辐射力计算及分析

针对水下椭球粒子,以声散射理论为基础,采用分波序列的方法,建立了椭球粒子声辐射力的理论计算模型。进而根据声辐射力计算公式,以刚性椭球粒子和液体椭球粒子为例,计算并分析不同Bessel波束作用下椭球粒子的轴向声辐射力函数特征。数值仿真计算结果表明,对于刚性椭球粒子,扁平椭球粒子相对于细长椭球粒子更有助于激发负声辐射力；对于液体椭球粒子,细长椭球粒子相对于扁平椭球粒子更加容易产生负声辐射力；对于不同介质的椭球粒子,不同的入射波束激发的负声辐射力的效果也存在明显的差异。该结果为复杂的尺寸和介质粒子声操控技术提供了理论的可行性。     

Positive ground state solutions for Schrödinger–Poisson system with critical nonlocal term in ℝ3

This paper is dedicated to studying the following Schrödinger–Poisson system $$\left\{\begin{array}{ll}-\mathrm{\Delta }u+V(x)u-K(x)\varphi |u{|}^{3}u=a(x)f(u),& x\in {ℝ}^3,\\ -\mathrm{\Delta }\varphi =K(x)|u{|}^5,& x\in {ℝ}^3.\end{array}\right.$$ Under some different assumptions on functions V(x), K(x), a(x) and f(u), by using the variational approach, we establish the existence of positive ground state solutions.     

Hydrodynamic and Thermodynamic Nonequilibrium Effects around Shock Waves: Based on a Discrete Boltzmann Method

A shock wave that is characterized by sharp physical gradients always draws the medium out of equilibrium. In this work, both hydrodynamic and thermodynamic nonequilibrium effects around the shock wave are investigated using a discrete Boltzmann model. Via Chapman–Enskog analysis, the local equilibrium and nonequilibrium velocity distribution functions in one-, two-, and three-dimensional velocity space are recovered across the shock wave. Besides, the absolute and relative deviation degrees are defined in order to describe the departure of the fluid system from the equilibrium state. The local and global nonequilibrium effects, nonorganized energy, and nonorganized energy flux are also investigated. Moreover, the impacts of the relaxation frequency, Mach number, thermal conductivity, viscosity, and the specific heat ratio on the nonequilibrium behaviours around shock waves are studied. This work is helpful for a deeper understanding of the fine structures of shock wave and nonequilibrium statistical mechanics.     

A simple three‐wave approximate Riemann solver for the Saint‐Venant‐Exner equations

Erosion and sediments transport processes have a great impact on industrial structures and on water quality. Despite its limitations, the Saint‐Venant‐Exner system is still (and for sure for some years) widely used in industrial codes to model the bedload sediment transport. In practice, its numerical resolution is mostly handled by a splitting technique that allows a weak coupling between hydraulic and morphodynamic distinct softwares but may suffer from important stability issues. In recent works, many authors proposed alternative methods based on a strong coupling that cure this problem but are not so trivial to implement in an industrial context. In this work, we then pursue 2 objectives. First, we propose a very simple scheme based on an approximate Riemann solver, respecting the strong coupling framework, and we demonstrate its stability and accuracy through a number of numerical test cases. However, second, we reinterpret our scheme as a splitting technique and we extend the purpose to propose what should be the minimal coupling that ensures the stability of the global numerical process in industrial codes, at least, when dealing with collocated finite volume method. The resulting splitting method is, up to our knowledge, the only one for which stability properties are fully demonstrated.